PROFESSIONAL OFFICES
  • 39 office condominiums
  • Offices sizes range from 340 – 1,550 SF
  • 1 assigned parking space per office located in the office level
  • Steven G interior design of the common areas
  • 4-story building
  • Rooftop garden oasis with Wi-Fi
  • 14-feet floor-to-ceiling glass windows in all offices
  • Move-in ready options available upon request
  • Pre-leasing services offered prior to closing

Architecture by Arquitectonica and interior design by Steven G, 12|12 Aventura will be a contemporary mixed-use complex with a vibrant atmosphere.

– Bernardo Rieber, CEO of Rieber Developments

KEY PLANS

Floor Plans

ORAL REPRESENTATIONS CANNOT BE RELIED UPON AS CORRECTLY STATING THE REPRESENTATIONS OF THE DEVELOPER. FOR CORRECT REPRESENTATIONS, MAKE REFERENCE TO THE DECLARATION OF CONDOMINIUM AND MASTER DECLARATION FOR THE PROJECT.
THE SQUARE FOOTAGE REFERENCED INCLUDES BOTH THE SQUARE FOOTAGE OF YOUR UNIT (AS MEASURED BELOW) AND A COMMON AREAS FACTOR SQUARE FOOTAGE OF 22% CORRESPONDING TO YOUR UNDIVIDED INTEREST IN THE COMMON ELEMENTS. ACCORDINGLY, AS A RESULT OF THE METHOD OF MEASUREMENT AND THE ADDITION OF THE COMMON AREA FACTOR THE STATED DI- MENSIONS ARE GREATER THAN THE ACTUAL AREA CORRESPONDING TO YOUR UNIT BOUNDARIES AS DEFINED IN THE DECLARATION. STATED SQUARE FOOTAGES AND DIMENSIONS ARE MEASURED TO THE EXTERIOR BOUNDARIES OF THE EXTERIOR WALLS AND THE CENTERLINE OF INTERIOR DEMISING WALLS AND IN FACT VARY FROM THE SQUARE FOOTAGE AND DIMENSIONS THAT WOULD BE DETERMINED BY USING THE DESCRIPTION AND DEFINITION OF THE “UNIT” SET FORTH IN THE DECLARATION (WHICH GENERALLY ONLY INCLUDES THE INTERIOR AIRSPACE BETWEEN THE PERIMETER WALLS AND EXCLUDES ALL INTERIOR STRUCTURAL COMPONENTS AND OTHER COMMON ELEMENTS). THIS METHOD IS GENERALLY USED IN SALES MATERIALS AND IS PROVIDED TO ALLOW A PRO- SPECTIVE BUYER TO COMPARE THE UNITS WITH UNITS IN OTHER CONDOMINIUM PROJECTS THAT UTILIZE THE SAME METHOD. ALL DIMENSIONS ARE ESTIMATES WHICH WILL VARY WITH ACTUAL CONSTRUCTION, AND ALL FLOOR PLANS, SPECIFICATIONS AND OTHER DEVELOPMENT PLANS ARE SUBJECT TO CHANGE AND WILL NOT NECESSARILY ACCURATELY REFLECT THE FINAL PLANS AND SPECIFICATIONS FOR THE DEVELOPMENT.


ORAL REPRESENTATIONS CANNOT BE RELIED UPON AS CORRECTLY STATING THE REPRESENTATIONS OF THE DEVELOPER. FOR CORRECT REPRESENTATIONS, MAKE REFERENCE TO THE DECLARATION OF CONDOMINIUM AND MASTER DECLARATION FOR THE PROJECT.
THE SQUARE FOOTAGE REFERENCED INCLUDES BOTH THE SQUARE FOOTAGE OF YOUR UNIT (AS MEASURED BELOW) AND A COMMON AREAS FACTOR SQUARE FOOTAGE OF 22% CORRESPONDING TO YOUR UNDIVIDED INTEREST IN THE COMMON ELEMENTS. ACCORDINGLY, AS A RESULT OF THE METHOD OF MEASUREMENT AND THE ADDITION OF THE COMMON AREA FACTOR THE STATED DI- MENSIONS ARE GREATER THAN THE ACTUAL AREA CORRESPONDING TO YOUR UNIT BOUNDARIES AS DEFINED IN THE DECLARATION. STATED SQUARE FOOTAGES AND DIMENSIONS ARE MEASURED TO THE EXTERIOR BOUNDARIES OF THE EXTERIOR WALLS AND THE CENTERLINE OF INTERIOR DEMISING WALLS AND IN FACT VARY FROM THE SQUARE FOOTAGE AND DIMENSIONS THAT WOULD BE DETERMINED BY USING THE DESCRIPTION AND DEFINITION OF THE “UNIT” SET FORTH IN THE DECLARATION (WHICH GENERALLY ONLY INCLUDES THE INTERIOR AIRSPACE BETWEEN THE PERIMETER WALLS AND EXCLUDES ALL INTERIOR STRUCTURAL COMPONENTS AND OTHER COMMON ELEMENTS). THIS METHOD IS GENERALLY USED IN SALES MATERIALS AND IS PROVIDED TO ALLOW A PRO- SPECTIVE BUYER TO COMPARE THE UNITS WITH UNITS IN OTHER CONDOMINIUM PROJECTS THAT UTILIZE THE SAME METHOD. ALL DIMENSIONS ARE ESTIMATES WHICH WILL VARY WITH ACTUAL CONSTRUCTION, AND ALL FLOOR PLANS, SPECIFICATIONS AND OTHER DEVELOPMENT PLANS ARE SUBJECT TO CHANGE AND WILL NOT NECESSARILY ACCURATELY REFLECT THE FINAL PLANS AND SPECIFICATIONS FOR THE DEVELOPMENT.


ORAL REPRESENTATIONS CANNOT BE RELIED UPON AS CORRECTLY STATING THE REPRESENTATIONS OF THE DEVELOPER. FOR CORRECT REPRESENTATIONS, MAKE REFERENCE TO THE DECLARATION OF CONDOMINIUM AND MASTER DECLARATION FOR THE PROJECT.
THE SQUARE FOOTAGE REFERENCED INCLUDES BOTH THE SQUARE FOOTAGE OF YOUR UNIT (AS MEASURED BELOW) AND A COMMON AREAS FACTOR SQUARE FOOTAGE OF 22% CORRESPONDING TO YOUR UNDIVIDED INTEREST IN THE COMMON ELEMENTS. ACCORDINGLY, AS A RESULT OF THE METHOD OF MEASUREMENT AND THE ADDITION OF THE COMMON AREA FACTOR THE STATED DI- MENSIONS ARE GREATER THAN THE ACTUAL AREA CORRESPONDING TO YOUR UNIT BOUNDARIES AS DEFINED IN THE DECLARATION. STATED SQUARE FOOTAGES AND DIMENSIONS ARE MEASURED TO THE EXTERIOR BOUNDARIES OF THE EXTERIOR WALLS AND THE CENTERLINE OF INTERIOR DEMISING WALLS AND IN FACT VARY FROM THE SQUARE FOOTAGE AND DIMENSIONS THAT WOULD BE DETERMINED BY USING THE DESCRIPTION AND DEFINITION OF THE “UNIT” SET FORTH IN THE DECLARATION (WHICH GENERALLY ONLY INCLUDES THE INTERIOR AIRSPACE BETWEEN THE PERIMETER WALLS AND EXCLUDES ALL INTERIOR STRUCTURAL COMPONENTS AND OTHER COMMON ELEMENTS). THIS METHOD IS GENERALLY USED IN SALES MATERIALS AND IS PROVIDED TO ALLOW A PRO- SPECTIVE BUYER TO COMPARE THE UNITS WITH UNITS IN OTHER CONDOMINIUM PROJECTS THAT UTILIZE THE SAME METHOD. ALL DIMENSIONS ARE ESTIMATES WHICH WILL VARY WITH ACTUAL CONSTRUCTION, AND ALL FLOOR PLANS, SPECIFICATIONS AND OTHER DEVELOPMENT PLANS ARE SUBJECT TO CHANGE AND WILL NOT NECESSARILY ACCURATELY REFLECT THE FINAL PLANS AND SPECIFICATIONS FOR THE DEVELOPMENT.


ORAL REPRESENTATIONS CANNOT BE RELIED UPON AS CORRECTLY STATING THE REPRESENTATIONS OF THE DEVELOPER. FOR CORRECT REPRESENTATIONS, MAKE REFERENCE TO THE DECLARATION OF CONDOMINIUM AND MASTER DECLARATION FOR THE PROJECT.
THE SQUARE FOOTAGE REFERENCED INCLUDES BOTH THE SQUARE FOOTAGE OF YOUR UNIT (AS MEASURED BELOW) AND A COMMON AREAS FACTOR SQUARE FOOTAGE OF 22% CORRESPONDING TO YOUR UNDIVIDED INTEREST IN THE COMMON ELEMENTS. ACCORDINGLY, AS A RESULT OF THE METHOD OF MEASUREMENT AND THE ADDITION OF THE COMMON AREA FACTOR THE STATED DI- MENSIONS ARE GREATER THAN THE ACTUAL AREA CORRESPONDING TO YOUR UNIT BOUNDARIES AS DEFINED IN THE DECLARATION. STATED SQUARE FOOTAGES AND DIMENSIONS ARE MEASURED TO THE EXTERIOR BOUNDARIES OF THE EXTERIOR WALLS AND THE CENTERLINE OF INTERIOR DEMISING WALLS AND IN FACT VARY FROM THE SQUARE FOOTAGE AND DIMENSIONS THAT WOULD BE DETERMINED BY USING THE DESCRIPTION AND DEFINITION OF THE “UNIT” SET FORTH IN THE DECLARATION (WHICH GENERALLY ONLY INCLUDES THE INTERIOR AIRSPACE BETWEEN THE PERIMETER WALLS AND EXCLUDES ALL INTERIOR STRUCTURAL COMPONENTS AND OTHER COMMON ELEMENTS). THIS METHOD IS GENERALLY USED IN SALES MATERIALS AND IS PROVIDED TO ALLOW A PRO- SPECTIVE BUYER TO COMPARE THE UNITS WITH UNITS IN OTHER CONDOMINIUM PROJECTS THAT UTILIZE THE SAME METHOD. ALL DIMENSIONS ARE ESTIMATES WHICH WILL VARY WITH ACTUAL CONSTRUCTION, AND ALL FLOOR PLANS, SPECIFICATIONS AND OTHER DEVELOPMENT PLANS ARE SUBJECT TO CHANGE AND WILL NOT NECESSARILY ACCURATELY REFLECT THE FINAL PLANS AND SPECIFICATIONS FOR THE DEVELOPMENT.


 

Available Inventory

Floor Plans

ORAL REPRESENTATIONS CANNOT BE RELIED UPON AS CORRECTLY STATING THE REPRESENTATIONS OF THE DEVELOPER. FOR CORRECT REPRESENTATIONS, MAKE REFERENCE TO THE DECLARATION OF CONDOMINIUM AND MASTER DECLARATION FOR THE PROJECT.
THE SQUARE FOOTAGE REFERENCED INCLUDES BOTH THE SQUARE FOOTAGE OF YOUR UNIT (AS MEASURED BELOW) AND A COMMON AREAS FACTOR SQUARE FOOTAGE OF 22% CORRESPONDING TO YOUR UNDIVIDED INTEREST IN THE COMMON ELEMENTS. ACCORDINGLY, AS A RESULT OF THE METHOD OF MEASUREMENT AND THE ADDITION OF THE COMMON AREA FACTOR THE STATED DI- MENSIONS ARE GREATER THAN THE ACTUAL AREA CORRESPONDING TO YOUR UNIT BOUNDARIES AS DEFINED IN THE DECLARATION. STATED SQUARE FOOTAGES AND DIMENSIONS ARE MEASURED TO THE EXTERIOR BOUNDARIES OF THE EXTERIOR WALLS AND THE CENTERLINE OF INTERIOR DEMISING WALLS AND IN FACT VARY FROM THE SQUARE FOOTAGE AND DIMENSIONS THAT WOULD BE DETERMINED BY USING THE DESCRIPTION AND DEFINITION OF THE “UNIT” SET FORTH IN THE DECLARATION (WHICH GENERALLY ONLY INCLUDES THE INTERIOR AIRSPACE BETWEEN THE PERIMETER WALLS AND EXCLUDES ALL INTERIOR STRUCTURAL COMPONENTS AND OTHER COMMON ELEMENTS). THIS METHOD IS GENERALLY USED IN SALES MATERIALS AND IS PROVIDED TO ALLOW A PRO- SPECTIVE BUYER TO COMPARE THE UNITS WITH UNITS IN OTHER CONDOMINIUM PROJECTS THAT UTILIZE THE SAME METHOD. ALL DIMENSIONS ARE ESTIMATES WHICH WILL VARY WITH ACTUAL CONSTRUCTION, AND ALL FLOOR PLANS, SPECIFICATIONS AND OTHER DEVELOPMENT PLANS ARE SUBJECT TO CHANGE AND WILL NOT NECESSARILY ACCURATELY REFLECT THE FINAL PLANS AND SPECIFICATIONS FOR THE DEVELOPMENT.


ORAL REPRESENTATIONS CANNOT BE RELIED UPON AS CORRECTLY STATING THE REPRESENTATIONS OF THE DEVELOPER. FOR CORRECT REPRESENTATIONS, MAKE REFERENCE TO THE DECLARATION OF CONDOMINIUM AND MASTER DECLARATION FOR THE PROJECT.
THE SQUARE FOOTAGE REFERENCED INCLUDES BOTH THE SQUARE FOOTAGE OF YOUR UNIT (AS MEASURED BELOW) AND A COMMON AREAS FACTOR SQUARE FOOTAGE OF 22% CORRESPONDING TO YOUR UNDIVIDED INTEREST IN THE COMMON ELEMENTS. ACCORDINGLY, AS A RESULT OF THE METHOD OF MEASUREMENT AND THE ADDITION OF THE COMMON AREA FACTOR THE STATED DI- MENSIONS ARE GREATER THAN THE ACTUAL AREA CORRESPONDING TO YOUR UNIT BOUNDARIES AS DEFINED IN THE DECLARATION. STATED SQUARE FOOTAGES AND DIMENSIONS ARE MEASURED TO THE EXTERIOR BOUNDARIES OF THE EXTERIOR WALLS AND THE CENTERLINE OF INTERIOR DEMISING WALLS AND IN FACT VARY FROM THE SQUARE FOOTAGE AND DIMENSIONS THAT WOULD BE DETERMINED BY USING THE DESCRIPTION AND DEFINITION OF THE “UNIT” SET FORTH IN THE DECLARATION (WHICH GENERALLY ONLY INCLUDES THE INTERIOR AIRSPACE BETWEEN THE PERIMETER WALLS AND EXCLUDES ALL INTERIOR STRUCTURAL COMPONENTS AND OTHER COMMON ELEMENTS). THIS METHOD IS GENERALLY USED IN SALES MATERIALS AND IS PROVIDED TO ALLOW A PRO- SPECTIVE BUYER TO COMPARE THE UNITS WITH UNITS IN OTHER CONDOMINIUM PROJECTS THAT UTILIZE THE SAME METHOD. ALL DIMENSIONS ARE ESTIMATES WHICH WILL VARY WITH ACTUAL CONSTRUCTION, AND ALL FLOOR PLANS, SPECIFICATIONS AND OTHER DEVELOPMENT PLANS ARE SUBJECT TO CHANGE AND WILL NOT NECESSARILY ACCURATELY REFLECT THE FINAL PLANS AND SPECIFICATIONS FOR THE DEVELOPMENT.


ORAL REPRESENTATIONS CANNOT BE RELIED UPON AS CORRECTLY STATING THE REPRESENTATIONS OF THE DEVELOPER. FOR CORRECT REPRESENTATIONS, MAKE REFERENCE TO THE DECLARATION OF CONDOMINIUM AND MASTER DECLARATION FOR THE PROJECT.
THE SQUARE FOOTAGE REFERENCED INCLUDES BOTH THE SQUARE FOOTAGE OF YOUR UNIT (AS MEASURED BELOW) AND A COMMON AREAS FACTOR SQUARE FOOTAGE OF 22% CORRESPONDING TO YOUR UNDIVIDED INTEREST IN THE COMMON ELEMENTS. ACCORDINGLY, AS A RESULT OF THE METHOD OF MEASUREMENT AND THE ADDITION OF THE COMMON AREA FACTOR THE STATED DI- MENSIONS ARE GREATER THAN THE ACTUAL AREA CORRESPONDING TO YOUR UNIT BOUNDARIES AS DEFINED IN THE DECLARATION. STATED SQUARE FOOTAGES AND DIMENSIONS ARE MEASURED TO THE EXTERIOR BOUNDARIES OF THE EXTERIOR WALLS AND THE CENTERLINE OF INTERIOR DEMISING WALLS AND IN FACT VARY FROM THE SQUARE FOOTAGE AND DIMENSIONS THAT WOULD BE DETERMINED BY USING THE DESCRIPTION AND DEFINITION OF THE “UNIT” SET FORTH IN THE DECLARATION (WHICH GENERALLY ONLY INCLUDES THE INTERIOR AIRSPACE BETWEEN THE PERIMETER WALLS AND EXCLUDES ALL INTERIOR STRUCTURAL COMPONENTS AND OTHER COMMON ELEMENTS). THIS METHOD IS GENERALLY USED IN SALES MATERIALS AND IS PROVIDED TO ALLOW A PRO- SPECTIVE BUYER TO COMPARE THE UNITS WITH UNITS IN OTHER CONDOMINIUM PROJECTS THAT UTILIZE THE SAME METHOD. ALL DIMENSIONS ARE ESTIMATES WHICH WILL VARY WITH ACTUAL CONSTRUCTION, AND ALL FLOOR PLANS, SPECIFICATIONS AND OTHER DEVELOPMENT PLANS ARE SUBJECT TO CHANGE AND WILL NOT NECESSARILY ACCURATELY REFLECT THE FINAL PLANS AND SPECIFICATIONS FOR THE DEVELOPMENT.


ORAL REPRESENTATIONS CANNOT BE RELIED UPON AS CORRECTLY STATING THE REPRESENTATIONS OF THE DEVELOPER. FOR CORRECT REPRESENTATIONS, MAKE REFERENCE TO THE DECLARATION OF CONDOMINIUM AND MASTER DECLARATION FOR THE PROJECT.
THE SQUARE FOOTAGE REFERENCED INCLUDES BOTH THE SQUARE FOOTAGE OF YOUR UNIT (AS MEASURED BELOW) AND A COMMON AREAS FACTOR SQUARE FOOTAGE OF 22% CORRESPONDING TO YOUR UNDIVIDED INTEREST IN THE COMMON ELEMENTS. ACCORDINGLY, AS A RESULT OF THE METHOD OF MEASUREMENT AND THE ADDITION OF THE COMMON AREA FACTOR THE STATED DI- MENSIONS ARE GREATER THAN THE ACTUAL AREA CORRESPONDING TO YOUR UNIT BOUNDARIES AS DEFINED IN THE DECLARATION. STATED SQUARE FOOTAGES AND DIMENSIONS ARE MEASURED TO THE EXTERIOR BOUNDARIES OF THE EXTERIOR WALLS AND THE CENTERLINE OF INTERIOR DEMISING WALLS AND IN FACT VARY FROM THE SQUARE FOOTAGE AND DIMENSIONS THAT WOULD BE DETERMINED BY USING THE DESCRIPTION AND DEFINITION OF THE “UNIT” SET FORTH IN THE DECLARATION (WHICH GENERALLY ONLY INCLUDES THE INTERIOR AIRSPACE BETWEEN THE PERIMETER WALLS AND EXCLUDES ALL INTERIOR STRUCTURAL COMPONENTS AND OTHER COMMON ELEMENTS). THIS METHOD IS GENERALLY USED IN SALES MATERIALS AND IS PROVIDED TO ALLOW A PRO- SPECTIVE BUYER TO COMPARE THE UNITS WITH UNITS IN OTHER CONDOMINIUM PROJECTS THAT UTILIZE THE SAME METHOD. ALL DIMENSIONS ARE ESTIMATES WHICH WILL VARY WITH ACTUAL CONSTRUCTION, AND ALL FLOOR PLANS, SPECIFICATIONS AND OTHER DEVELOPMENT PLANS ARE SUBJECT TO CHANGE AND WILL NOT NECESSARILY ACCURATELY REFLECT THE FINAL PLANS AND SPECIFICATIONS FOR THE DEVELOPMENT.


ORAL REPRESENTATIONS CANNOT BE RELIED UPON AS CORRECTLY STATING THE REPRESENTATIONS OF THE DEVELOPER. FOR CORRECT REPRESENTATIONS, MAKE REFERENCE TO THE DECLARATION OF CONDOMINIUM AND MASTER DECLARATION FOR THE PROJECT.
THE SQUARE FOOTAGE REFERENCED INCLUDES BOTH THE SQUARE FOOTAGE OF YOUR UNIT (AS MEASURED BELOW) AND A COMMON AREAS FACTOR SQUARE FOOTAGE OF 22% CORRESPONDING TO YOUR UNDIVIDED INTEREST IN THE COMMON ELEMENTS. ACCORDINGLY, AS A RESULT OF THE METHOD OF MEASUREMENT AND THE ADDITION OF THE COMMON AREA FACTOR THE STATED DI- MENSIONS ARE GREATER THAN THE ACTUAL AREA CORRESPONDING TO YOUR UNIT BOUNDARIES AS DEFINED IN THE DECLARATION. STATED SQUARE FOOTAGES AND DIMENSIONS ARE MEASURED TO THE EXTERIOR BOUNDARIES OF THE EXTERIOR WALLS AND THE CENTERLINE OF INTERIOR DEMISING WALLS AND IN FACT VARY FROM THE SQUARE FOOTAGE AND DIMENSIONS THAT WOULD BE DETERMINED BY USING THE DESCRIPTION AND DEFINITION OF THE “UNIT” SET FORTH IN THE DECLARATION (WHICH GENERALLY ONLY INCLUDES THE INTERIOR AIRSPACE BETWEEN THE PERIMETER WALLS AND EXCLUDES ALL INTERIOR STRUCTURAL COMPONENTS AND OTHER COMMON ELEMENTS). THIS METHOD IS GENERALLY USED IN SALES MATERIALS AND IS PROVIDED TO ALLOW A PRO- SPECTIVE BUYER TO COMPARE THE UNITS WITH UNITS IN OTHER CONDOMINIUM PROJECTS THAT UTILIZE THE SAME METHOD. ALL DIMENSIONS ARE ESTIMATES WHICH WILL VARY WITH ACTUAL CONSTRUCTION, AND ALL FLOOR PLANS, SPECIFICATIONS AND OTHER DEVELOPMENT PLANS ARE SUBJECT TO CHANGE AND WILL NOT NECESSARILY ACCURATELY REFLECT THE FINAL PLANS AND SPECIFICATIONS FOR THE DEVELOPMENT.


 

Available Inventory

Floor Plans

ORAL REPRESENTATIONS CANNOT BE RELIED UPON AS CORRECTLY STATING THE REPRESENTATIONS OF THE DEVELOPER. FOR CORRECT REPRESENTATIONS, MAKE REFERENCE TO THE DECLARATION OF CONDOMINIUM AND MASTER DECLARATION FOR THE PROJECT.
THE SQUARE FOOTAGE REFERENCED INCLUDES BOTH THE SQUARE FOOTAGE OF YOUR UNIT (AS MEASURED BELOW) AND A COMMON AREAS FACTOR SQUARE FOOTAGE OF 22% CORRESPONDING TO YOUR UNDIVIDED INTEREST IN THE COMMON ELEMENTS. ACCORDINGLY, AS A RESULT OF THE METHOD OF MEASUREMENT AND THE ADDITION OF THE COMMON AREA FACTOR THE STATED DI- MENSIONS ARE GREATER THAN THE ACTUAL AREA CORRESPONDING TO YOUR UNIT BOUNDARIES AS DEFINED IN THE DECLARATION. STATED SQUARE FOOTAGES AND DIMENSIONS ARE MEASURED TO THE EXTERIOR BOUNDARIES OF THE EXTERIOR WALLS AND THE CENTERLINE OF INTERIOR DEMISING WALLS AND IN FACT VARY FROM THE SQUARE FOOTAGE AND DIMENSIONS THAT WOULD BE DETERMINED BY USING THE DESCRIPTION AND DEFINITION OF THE “UNIT” SET FORTH IN THE DECLARATION (WHICH GENERALLY ONLY INCLUDES THE INTERIOR AIRSPACE BETWEEN THE PERIMETER WALLS AND EXCLUDES ALL INTERIOR STRUCTURAL COMPONENTS AND OTHER COMMON ELEMENTS). THIS METHOD IS GENERALLY USED IN SALES MATERIALS AND IS PROVIDED TO ALLOW A PRO- SPECTIVE BUYER TO COMPARE THE UNITS WITH UNITS IN OTHER CONDOMINIUM PROJECTS THAT UTILIZE THE SAME METHOD. ALL DIMENSIONS ARE ESTIMATES WHICH WILL VARY WITH ACTUAL CONSTRUCTION, AND ALL FLOOR PLANS, SPECIFICATIONS AND OTHER DEVELOPMENT PLANS ARE SUBJECT TO CHANGE AND WILL NOT NECESSARILY ACCURATELY REFLECT THE FINAL PLANS AND SPECIFICATIONS FOR THE DEVELOPMENT.


ORAL REPRESENTATIONS CANNOT BE RELIED UPON AS CORRECTLY STATING THE REPRESENTATIONS OF THE DEVELOPER. FOR CORRECT REPRESENTATIONS, MAKE REFERENCE TO THE DECLARATION OF CONDOMINIUM AND MASTER DECLARATION FOR THE PROJECT.
THE SQUARE FOOTAGE REFERENCED INCLUDES BOTH THE SQUARE FOOTAGE OF YOUR UNIT (AS MEASURED BELOW) AND A COMMON AREAS FACTOR SQUARE FOOTAGE OF 22% CORRESPONDING TO YOUR UNDIVIDED INTEREST IN THE COMMON ELEMENTS. ACCORDINGLY, AS A RESULT OF THE METHOD OF MEASUREMENT AND THE ADDITION OF THE COMMON AREA FACTOR THE STATED DI- MENSIONS ARE GREATER THAN THE ACTUAL AREA CORRESPONDING TO YOUR UNIT BOUNDARIES AS DEFINED IN THE DECLARATION. STATED SQUARE FOOTAGES AND DIMENSIONS ARE MEASURED TO THE EXTERIOR BOUNDARIES OF THE EXTERIOR WALLS AND THE CENTERLINE OF INTERIOR DEMISING WALLS AND IN FACT VARY FROM THE SQUARE FOOTAGE AND DIMENSIONS THAT WOULD BE DETERMINED BY USING THE DESCRIPTION AND DEFINITION OF THE “UNIT” SET FORTH IN THE DECLARATION (WHICH GENERALLY ONLY INCLUDES THE INTERIOR AIRSPACE BETWEEN THE PERIMETER WALLS AND EXCLUDES ALL INTERIOR STRUCTURAL COMPONENTS AND OTHER COMMON ELEMENTS). THIS METHOD IS GENERALLY USED IN SALES MATERIALS AND IS PROVIDED TO ALLOW A PRO- SPECTIVE BUYER TO COMPARE THE UNITS WITH UNITS IN OTHER CONDOMINIUM PROJECTS THAT UTILIZE THE SAME METHOD. ALL DIMENSIONS ARE ESTIMATES WHICH WILL VARY WITH ACTUAL CONSTRUCTION, AND ALL FLOOR PLANS, SPECIFICATIONS AND OTHER DEVELOPMENT PLANS ARE SUBJECT TO CHANGE AND WILL NOT NECESSARILY ACCURATELY REFLECT THE FINAL PLANS AND SPECIFICATIONS FOR THE DEVELOPMENT.


ORAL REPRESENTATIONS CANNOT BE RELIED UPON AS CORRECTLY STATING THE REPRESENTATIONS OF THE DEVELOPER. FOR CORRECT REPRESENTATIONS, MAKE REFERENCE TO THE DECLARATION OF CONDOMINIUM AND MASTER DECLARATION FOR THE PROJECT.
THE SQUARE FOOTAGE REFERENCED INCLUDES BOTH THE SQUARE FOOTAGE OF YOUR UNIT (AS MEASURED BELOW) AND A COMMON AREAS FACTOR SQUARE FOOTAGE OF 22% CORRESPONDING TO YOUR UNDIVIDED INTEREST IN THE COMMON ELEMENTS. ACCORDINGLY, AS A RESULT OF THE METHOD OF MEASUREMENT AND THE ADDITION OF THE COMMON AREA FACTOR THE STATED DI- MENSIONS ARE GREATER THAN THE ACTUAL AREA CORRESPONDING TO YOUR UNIT BOUNDARIES AS DEFINED IN THE DECLARATION. STATED SQUARE FOOTAGES AND DIMENSIONS ARE MEASURED TO THE EXTERIOR BOUNDARIES OF THE EXTERIOR WALLS AND THE CENTERLINE OF INTERIOR DEMISING WALLS AND IN FACT VARY FROM THE SQUARE FOOTAGE AND DIMENSIONS THAT WOULD BE DETERMINED BY USING THE DESCRIPTION AND DEFINITION OF THE “UNIT” SET FORTH IN THE DECLARATION (WHICH GENERALLY ONLY INCLUDES THE INTERIOR AIRSPACE BETWEEN THE PERIMETER WALLS AND EXCLUDES ALL INTERIOR STRUCTURAL COMPONENTS AND OTHER COMMON ELEMENTS). THIS METHOD IS GENERALLY USED IN SALES MATERIALS AND IS PROVIDED TO ALLOW A PRO- SPECTIVE BUYER TO COMPARE THE UNITS WITH UNITS IN OTHER CONDOMINIUM PROJECTS THAT UTILIZE THE SAME METHOD. ALL DIMENSIONS ARE ESTIMATES WHICH WILL VARY WITH ACTUAL CONSTRUCTION, AND ALL FLOOR PLANS, SPECIFICATIONS AND OTHER DEVELOPMENT PLANS ARE SUBJECT TO CHANGE AND WILL NOT NECESSARILY ACCURATELY REFLECT THE FINAL PLANS AND SPECIFICATIONS FOR THE DEVELOPMENT.


ORAL REPRESENTATIONS CANNOT BE RELIED UPON AS CORRECTLY STATING THE REPRESENTATIONS OF THE DEVELOPER. FOR CORRECT REPRESENTATIONS, MAKE REFERENCE TO THE DECLARATION OF CONDOMINIUM AND MASTER DECLARATION FOR THE PROJECT.
THE SQUARE FOOTAGE REFERENCED INCLUDES BOTH THE SQUARE FOOTAGE OF YOUR UNIT (AS MEASURED BELOW) AND A COMMON AREAS FACTOR SQUARE FOOTAGE OF 22% CORRESPONDING TO YOUR UNDIVIDED INTEREST IN THE COMMON ELEMENTS. ACCORDINGLY, AS A RESULT OF THE METHOD OF MEASUREMENT AND THE ADDITION OF THE COMMON AREA FACTOR THE STATED DI- MENSIONS ARE GREATER THAN THE ACTUAL AREA CORRESPONDING TO YOUR UNIT BOUNDARIES AS DEFINED IN THE DECLARATION. STATED SQUARE FOOTAGES AND DIMENSIONS ARE MEASURED TO THE EXTERIOR BOUNDARIES OF THE EXTERIOR WALLS AND THE CENTERLINE OF INTERIOR DEMISING WALLS AND IN FACT VARY FROM THE SQUARE FOOTAGE AND DIMENSIONS THAT WOULD BE DETERMINED BY USING THE DESCRIPTION AND DEFINITION OF THE “UNIT” SET FORTH IN THE DECLARATION (WHICH GENERALLY ONLY INCLUDES THE INTERIOR AIRSPACE BETWEEN THE PERIMETER WALLS AND EXCLUDES ALL INTERIOR STRUCTURAL COMPONENTS AND OTHER COMMON ELEMENTS). THIS METHOD IS GENERALLY USED IN SALES MATERIALS AND IS PROVIDED TO ALLOW A PRO- SPECTIVE BUYER TO COMPARE THE UNITS WITH UNITS IN OTHER CONDOMINIUM PROJECTS THAT UTILIZE THE SAME METHOD. ALL DIMENSIONS ARE ESTIMATES WHICH WILL VARY WITH ACTUAL CONSTRUCTION, AND ALL FLOOR PLANS, SPECIFICATIONS AND OTHER DEVELOPMENT PLANS ARE SUBJECT TO CHANGE AND WILL NOT NECESSARILY ACCURATELY REFLECT THE FINAL PLANS AND SPECIFICATIONS FOR THE DEVELOPMENT.


ORAL REPRESENTATIONS CANNOT BE RELIED UPON AS CORRECTLY STATING THE REPRESENTATIONS OF THE DEVELOPER. FOR CORRECT REPRESENTATIONS, MAKE REFERENCE TO THE DECLARATION OF CONDOMINIUM AND MASTER DECLARATION FOR THE PROJECT.
THE SQUARE FOOTAGE REFERENCED INCLUDES BOTH THE SQUARE FOOTAGE OF YOUR UNIT (AS MEASURED BELOW) AND A COMMON AREAS FACTOR SQUARE FOOTAGE OF 22% CORRESPONDING TO YOUR UNDIVIDED INTEREST IN THE COMMON ELEMENTS. ACCORDINGLY, AS A RESULT OF THE METHOD OF MEASUREMENT AND THE ADDITION OF THE COMMON AREA FACTOR THE STATED DI- MENSIONS ARE GREATER THAN THE ACTUAL AREA CORRESPONDING TO YOUR UNIT BOUNDARIES AS DEFINED IN THE DECLARATION. STATED SQUARE FOOTAGES AND DIMENSIONS ARE MEASURED TO THE EXTERIOR BOUNDARIES OF THE EXTERIOR WALLS AND THE CENTERLINE OF INTERIOR DEMISING WALLS AND IN FACT VARY FROM THE SQUARE FOOTAGE AND DIMENSIONS THAT WOULD BE DETERMINED BY USING THE DESCRIPTION AND DEFINITION OF THE “UNIT” SET FORTH IN THE DECLARATION (WHICH GENERALLY ONLY INCLUDES THE INTERIOR AIRSPACE BETWEEN THE PERIMETER WALLS AND EXCLUDES ALL INTERIOR STRUCTURAL COMPONENTS AND OTHER COMMON ELEMENTS). THIS METHOD IS GENERALLY USED IN SALES MATERIALS AND IS PROVIDED TO ALLOW A PRO- SPECTIVE BUYER TO COMPARE THE UNITS WITH UNITS IN OTHER CONDOMINIUM PROJECTS THAT UTILIZE THE SAME METHOD. ALL DIMENSIONS ARE ESTIMATES WHICH WILL VARY WITH ACTUAL CONSTRUCTION, AND ALL FLOOR PLANS, SPECIFICATIONS AND OTHER DEVELOPMENT PLANS ARE SUBJECT TO CHANGE AND WILL NOT NECESSARILY ACCURATELY REFLECT THE FINAL PLANS AND SPECIFICATIONS FOR THE DEVELOPMENT.


ORAL REPRESENTATIONS CANNOT BE RELIED UPON AS CORRECTLY STATING THE REPRESENTATIONS OF THE DEVELOPER. FOR CORRECT REPRESENTATIONS, MAKE REFERENCE TO THE DECLARATION OF CONDOMINIUM AND MASTER DECLARATION FOR THE PROJECT.
THE SQUARE FOOTAGE REFERENCED INCLUDES BOTH THE SQUARE FOOTAGE OF YOUR UNIT (AS MEASURED BELOW) AND A COMMON AREAS FACTOR SQUARE FOOTAGE OF 22% CORRESPONDING TO YOUR UNDIVIDED INTEREST IN THE COMMON ELEMENTS. ACCORDINGLY, AS A RESULT OF THE METHOD OF MEASUREMENT AND THE ADDITION OF THE COMMON AREA FACTOR THE STATED DI- MENSIONS ARE GREATER THAN THE ACTUAL AREA CORRESPONDING TO YOUR UNIT BOUNDARIES AS DEFINED IN THE DECLARATION. STATED SQUARE FOOTAGES AND DIMENSIONS ARE MEASURED TO THE EXTERIOR BOUNDARIES OF THE EXTERIOR WALLS AND THE CENTERLINE OF INTERIOR DEMISING WALLS AND IN FACT VARY FROM THE SQUARE FOOTAGE AND DIMENSIONS THAT WOULD BE DETERMINED BY USING THE DESCRIPTION AND DEFINITION OF THE “UNIT” SET FORTH IN THE DECLARATION (WHICH GENERALLY ONLY INCLUDES THE INTERIOR AIRSPACE BETWEEN THE PERIMETER WALLS AND EXCLUDES ALL INTERIOR STRUCTURAL COMPONENTS AND OTHER COMMON ELEMENTS). THIS METHOD IS GENERALLY USED IN SALES MATERIALS AND IS PROVIDED TO ALLOW A PRO- SPECTIVE BUYER TO COMPARE THE UNITS WITH UNITS IN OTHER CONDOMINIUM PROJECTS THAT UTILIZE THE SAME METHOD. ALL DIMENSIONS ARE ESTIMATES WHICH WILL VARY WITH ACTUAL CONSTRUCTION, AND ALL FLOOR PLANS, SPECIFICATIONS AND OTHER DEVELOPMENT PLANS ARE SUBJECT TO CHANGE AND WILL NOT NECESSARILY ACCURATELY REFLECT THE FINAL PLANS AND SPECIFICATIONS FOR THE DEVELOPMENT.


Available Inventory

3D VIEWS






Menu